Hello! Let's see what you can create with Tutti Designs today!
For this quick card, i used 3 different papers. The pretty color paper is from We Are 3 Digital Paper - Summer Splashes. The cream paper is Tutti Designs - Holiday Wishes. And the dark blue is from Fairy Hugs Craft Papers - BumbleTwinkle. So all i did was cut the die from the Summer Splashes. A tip is to cut the main die from the center of the first layer, because you will be covering up the first layer. So to layer, but the colorful paper (one you cut the die from), then a cream paper, back the main die with the pretty blue paper and use with double sided foam tape. Ad a few gems if you'd like.
Hello! Let's see what you can create with Tutti Designs today!
For this card, i started with Tutti Designs Craft Paper - Holiday Wishes. (cream texture background), Next i used Fairy Hugs Craft Papers - WinkleBush for the green background. For Tutti Designs - 636 Floral Heart Frame (save some of the fall out flowers for the basket) I also cut Tutti Designs - 219 Nesting Stitched Ovals from cream card stock. One oval is white card stock. For the Tandem Bike, i did a lot of paper piecing. I started out cutting the die from silver metallic paper as my base. I then cut the die from black card stock and fussy cut out the pieces shown. Next i cut out the die from Fairy Hugs Craft Papers - RainbowDance and fussy cut what i needed. Last, i fussy cut the basket from kraft paper and colored it in as shown with pencils. I colored the fall out flowers and adhered them as well. For the wheel caps, i used red brads. *tip - So that the brads wouldn't show, i glued the bike to the ovals first and then hold punched the center of the wheel caps through the ovals and then i attached the brads.
Hello! Let's see what you can create with Tutti Designs today!
I feel like i am making the "never-ending" die. I have a tough time throwing about the negative bits.
So you will be seeing several ways you can create with Tutti Designs - Daisy Panel.
For this card, the inspiration was the negative bits. lol. So, if you remember i made a card with the "burlap" texture and a bee. Today, i am sharing the negative bits from the burlap texture of the Daisy Panel. I wanted a paper to contrast with the burlap, so i die cut the Daisy Panel from the plum. (don't worry..i have two more daisy panels using the negative plum bits.) I placed the plum diecut on to some netting paper (also from Tutti Designs Craft Papers - Holiday Wishes) Then i paper pieced just the left side of the die. I set the aside. Next, i used Tutti Designs - Beehive Pattern. I cut that in half so it could be on both sides of the panel. So, the first layer paper is We Are 3 Digital Paper - Miracles Happen. I decide to make a 5 x 7 card because of the size of the panel. I adhered the Beehive Pattern on the base (keeping in mind where i planned to put the panel). Next, i used double sided foam tape to adhere the panel. This is a good time to add gems if you want them on your flowers. I die cut Tutti Designs - Cat and Butterfly and Tutti Designs - Word Set Hello out of black card stock. I chose to back the butterfly with the same burlap type paper and fussy cut around it. The word Hello was adhered with glue and the cat and butterfly was adhered with foam tape.
Hello! Let's see what you can create with Tutti Designs today!
Earlier this week on my blog, i shared a Fairy Hugs card using this same layout design. This time i used Tutti Designs dies to create this card. I love this look as much as the Fairy Hugs card.
To see how i created the background wreath, you can watch my youtube tutorial video. It also shows how i put a similar card together.
Here is that link : https://youtu.be/06NY4B1_QnE
How i changed out this card.. i started with Tutti Designs Craft Paper - Holiday Wishes. The gray background is faux embossed paper and the green/black paper is also from Holiday Wishes. So the first thing i did was make the wreath background. Then i cut out Tutti Designs - Magical Castle from white glitter paper. If you look at the original design, you can see i cut the castle out from the background. I saved the swirly bits and added those to the card in the end. However, i also cut the castle in 3 sections because i wanted it to be dimensional. There are two partial slits/cuts on each side of the center part of the castle. I made the sections using those cuts by cutting them all the way from the bottom to the top. If you know me, by reading.. you know i like to save paper, so i glued the two outside pieces to the green/black paper mat in the center because i wanted the castle to have a backing. I arranged those two side pieces to that the middle piece could over lap the sides. I used double sided foam tape for the center piece and attached that. I made a tiny hole by the castle in the middle of the mat and hand cut the castle out leaving a bit of the green paper showing. (you can see that by looking at the castle on the card). Next i put the torn wreath section on top of the cut out hole from the castle. i cut out Tutti Designs - Pinecone Branch from brown paper and cut it in 3 sections after i cut the rectangle line off of the pinecone branch. So i figured out the castle placement and how the pinecone branches would work before i adhered them to the card. I used double-side foam tape for the castle and tucked in the pinecone branch sections and adhered those with glue. Those curly bits from the castle die cut, i trimmed up and glued those in as well.
Hello! Let's see what you can create with Tutti Designs today!
For this card, i started with Tutti Designs Craft Papers - Holiday Wishes. I used one green buffalo plaid paper and cut out the center of the paper using Tutti Designs - 618 Nesting Stitched Postage. I set that aside and saved the outside/frame for the first layer on the card, knowing that i'd cover up what i cut out from the center of the paper. Next i used Fairy Hugs Craft Papers - RainbowDance and cut out a large enough square to cover the cut out from the green paper. From the center of the orange paper i cut out Tutti Designs - 563 Always Grateful, i saved the large negative pumpkin bits so i could inset them back into the pumpkin. So i layered the orange paper, the green buffalo plaid postage die cut on top of the orange paper (that i cut the Always Grateful out of). I then glued the Always Grateful orange cut out on top of the green buffalo plaid postage die cut and added the large pumpkin negative bits. So fair i used 2 papers by diecutting "under" what would be covered up by other papers. No waste that way! so before i could put down the orange part i just glued together, i cut out Tutti Designs - 394 Leaves Scroll 2 times one from a craft paper and another from a scrap i had. I glued them to the back of the orange design i had made and used double sided foam tape to add the whole design to the green buffalo plaid mat (with a die cut out of it). Last thing was i added a bow and some gems.
Hello! Let's see what you can create with Tutti Designs today!
For this card, i started with We Are 3 Digital Paper - Black Essentials. Next i used Tutti Designs Craft Papers - Holiday Wishes and cut out Tutti Designs - 150 Elegant Pumpkins and 139 Maple Vine Frame using the green paper. I cut the Maple Vine frame to make it like a border. Next i die cut Tutti Designs - 214 Nesting Stitched Banners from vellum and i stamped the sentiment and used clear embossing powder to seal it. I positioned the leaves, sentiment and pumpkins on the dotted paper and adhered them. That was matted with Kraft Paper and put on a black card base. Next to add the buffalo pattern i was really careful to line up the pumpkins so that the lines matched up with the die cut. So i die cut the pumpkins separately because they lean in a different direction. I paper pieced each pumpkin with the negative pieces.
Hello! Let's see what you can create with Tutti Designs today!
For this card, i wanted to make a "vintage" silhouette style card. I thought it could be used for Halloween or Thanksgiving. What set the mood for me was the bright paper, Fairy Hugs - RainbowDance. I cut Tutti Designs - 139 Maple Vine Frame and put the center back in. I glued that onto black card stock and randomly cut around it leaving a black edge. Next i used Tutti Designs Craft Paper - Holiday Wishes to cut out Tutti Designs - 394 Leaves Scroll...and i set the aside. Then i used another paper from Tutti Designs Craft Papers - Holiday Wishes (cream) and matted the Maple frame on top of the cream paper. I used an old Fiskar scissors i had that makes edges on paper for the edge on the cream paper. I layered those on top of a card base. Next, i die cut Tutti Designs - 150 Elegant Pumpkins out of black card stock and snipped away all of the decorative swirls/leaves so i just had the pumpkins. I placed the die cut on top of a textured slate gray paper and hand cut the gray off from around the pumpkins. I positioned the pumpkins on to of the card so i could figure out where to put the Leaves Scroll. I glued the leaves down and added double sided foam tape to the pumpkins and adhered them as well. Last thing i did was die cut Tutti Designs - 240 Word Set Hello out of a scrap from Fairy Hugs Craft Paper - RainbowDance.. so it would match the maple vine frame. i glued that to the pumpkins.
