Fairy Hugs - Teapot Cottage with Magnolia Branch

Hello Monday!

Let's see what we can make using supplies from Fairy Hugs Store 

I am using Fairy Hugs - Teapot Cottage with Magnolia Branch

For this card,  i am sharing a photo tutorial.  You will see how things evolved differently than originally planned! 

To start with i wanted to make a half circle stamped design.  So i cut out a large circle and and smaller circle i didn't use the large circle itself.. i wanted the large circle outline so that i could put a circle inside of it, leaving a donut space to stamp into.  Masking paper would have been perfect for this but i didn't want to waste the large sheets for this project so i used computer paper.

You can see how the outside and the circle made the "mask".

Before i removed the "mask" i also added some Distress Oxide Ink - Tumbled Glass and Broken China.

Next i masked off the strip to stamp the words and i also had the circle shown with that strip mask, but didn't take a photo of that. 

What you are seeing is the circle mask left in place so that i can make a halo for the moon.

And this is where things started to change.  First, you can see i added a strip of foliage along side of the stamped words.. they don't show up in the end.  I didn't like that i didn't use the moon mask at the very start of my masking when i made the "tube" mask because the edge of the tube masking showed up in the moon.  So i die cut out a circle the size of the moon i wanted to use and replaced it (inset it) in the die cut" with another moon  that i had inked up.  I could have just layered it on top.. but i didn't.  So the next mishap was when i took off the moon mask i pulled some of the paper off.  So i made a second moon to cover that up.  Now it is starting to look really magical with 2 moons. 

I decided to add some star swirls.  This stamp is Fairy Hugs - Moon Dust (i have two of these stamps because i cut one apart so i could stamp the "swirls" without the moon)

I planned all along to stamp Fairy Hugs - Teapot Cottage w/ Fairy Hugs Steam as one stamp and then hand cut it out to place on top of the background design.  My first attempt was to color the entire cottage, but it just didn't work with the background, so i stamped it again and just colored in the door.

As you can see with the end result, the words didn't show up except at the top and bottom.  I totally didn't like just seeing the "Sweet Jasmine" unfinished at the top, so i covered it up with a banner that i stamped out the words "With Love"  from Fairy Hugs - Love at Christmas, again a stamp i cut apart to make a new sentiment. 

Fairy Hugs Store Supplies:

Fairy Hugs - Teapot Cottage

Fairy Hugs - Steam

Fairy Hugs - Magnolia Branch

Fairy Hugs - Tea Collage (not shown in the end result)

Fairy Hugs - Moon Dust (cut apart)

Fairy Hugs Sentiment - Love at Christmas (cut apart)

Like us on Facebook
Follow us on Instagram: Fairy Hugs Store

 Join our Fairy Hugs Facebook Group here

Fairy Hugs Pinterest

 Don't forget to include #FairyHugsStore on your projects and tag us at @FairyHugstore so we can be sure to see and comment on your projects!

Sign up to receive Fairy Hugs Newsletters at the Fairy Hugs store.

Fairy Hugs Retailers:

Fairy Stamper

Julia Watts Crafts UK

Simon Says Stamps

Frantic Stamper

Ecstasy Crafts

 

Thanks for stopping by!

Fairy Hugs - Rosalie's Rose and Lisa Horton 3D Torn Aperture

Hello everyone!! 

Let's see what we can make using Fairy Hugs Store stamps! 

Newest Video on the Fairy Hugs YouTube Channel!

https://youtu.be/upnBPvkj1K8 

Fairy Hugs Store Supplies:

 

Fairy Hugs - Rosalie's Rose

Fairy Hugs Sentiment - Love at Christmas

I have also used:

Lisa Horton - 3D Embossing Folder - Torn Aperture

Like us on Facebook
Follow us on Instagram: Fairy Hugs Store

 Join our Fairy Hugs Facebook Group here

 Don't forget to include #FairyHugstore on your projects and tag us at @FairyHugStore so we can be sure to see and comment on your projects!

Sign up to receive Fairy Hugs Newsletters at the Fairy Hugs store.

Check out our New Fairy Hugs YouTube Channel

 

Thanks for stopping by!

Tutti Designs - Floral Watering can with Love!

Hello!  Let's see what you can create with Tutti Designs today!

I am calling this card, my deconstructed Tutti Card.  As you might have noticed in my last Tutti Designs post, i created another Floral Watering Can.  It was pretty much constructed how the die was made..i just changed out the colors.  For this card, i went a bit further.  I used the green Floral Watering Can from the last card, however, i had cut away the green flowers/stems.  So i pretty much had a can without flowers..so i cut back the opening at the top and cut out just the flowers 2 times from the pinky/red paper.  I had enough for the watering can and to "sprinkle" out of the can by fussy cutting them.  If not, i would cut out a few singles i wanted from the scraps.  I wanted to fill in the background of the watering can so i placed the die on the gingham scrap and traced around it. I fussy cut that inside of the drawn line and attached that to the back of the watering can.  

*Tip, i die cut a large enough square from the gingham paper in the back ground because i knew it would get covered up by the cream paper. Now i can add the flowers to the watering can. I set that aside and die cut Tutti Designs - 101 Butterfly Oval.  I had just wanted the butterflies and decided to use the rest of the oval for the corner.  Time to add everything to the card base!  Before i added the watering can, i stamped the sentiment where i wanted it to go.  Now i can start adhering everything.  The watering can was added with double sided foam tape. The sprinkled flowers, corner flowers and butterflies were adhered with glue.  Hard to believe the flower centers are a ruby gem, because they look black in the photo.  I also added some gems to the butterfly bodies! 

I have used:

Tutti Designs - 184 Floral Watering Can

Tutti Designs - 101 Butterfly Oval

Be sure to visit Tutti Designs

for LOTS more fabulous dies and

come back again for more Tutti Designs inspiration!

Here are some Tutti Designs quick links:

Tutti Designs Store

Tutti Designs Pinterest

Tutti Designs Facebook

Tutti Designs Fan Club on Facebook

Tutti Designs Instagram

Also used:

Fairy Hugs Sentiment - Love at Christmas

We Are 3 Digital Paper - At the Beach

We Are 3 Digital Paper - Ho, Ho, Ho

Fairy Hugs Craft Papers - WinkleBush (green)

Last Minute Manda - You're Hot Stuff w/present

 I have something to share with you today!

Actually, for the next two months i will be sharing sweet images from

Last Minute Manda

For this month i chose to work with a set of Dragons that would be perfect for Valentines!

You can find this set called, "You're Hot Stuff" by clicking here.

        

I am also using:

Tutti Designs - 636 Floral Heart Frame

Fairy Hugs Sentiment - Love at Christmas

We Are 3 Digital Paper - Enchanted

Fairy Hugs Craft Papers - FrostFlight

Thanks for stopping by!

Fairy Hugs - Christmas Wreath Card Tutorial

Hello everyone and happy Monday!! 

It’s time for a new Fairy Stamper YouTube featuring Fairy Hugs stamps.

      

Every week you will see 

Fairy Stamper YouTube Tutorial Videos by the Fairy Stamper Design Team

Please subscribe so you won't miss a video!

Layout without bow or coloring the berry branches

You can see how i created this card by watching this YouTube Tutorial:

https://youtu.be/e8iCSSp9Ahk

 

Fairy Stamper Store Supplies:

Fairy Hugs Enchanted Dies - Magical Hollow

Fairy Hugs - Thank You set (used berry twig stamp)

Fairy Hugs - Pinecones

Fairy Hugs Sentiment - Love at Christmas

Fairy Hugs Craft Papers - FrostFlight 

Tutti Designs - Cones and Branches 

 Store ** Facebook Challenge ** Facebook** Instagram ** YouTube

Like us on Facebook
Follow us on Instagram: Fairy Stamper

Wake Up, It's Christmas - Fairy Hugs - Polar Bear Family

I have so many cards to share this week.. but first i need to catch up on my latest cards!

Let's see what we can make using supplies from Fairy Hugs Store 

I am using Fairy Hugs - Polar Bear Family

I think of my parents when i was little and it was Christmas Day.. and i wanted to get up at 4am. I think this little bear is me wanting my parent to wake up!  It's Christmas!!

So to make this card, i started out with Fairy Hugs Craft Papers - FrostFlight. I based my scene around the polar bears, so they were stamped first with VersaFine Clair Ink - Nocturne. I colored the Fairy Hugs - Polar Bear family with Prismacolor pencils.  Next i knew i wanted a tree line behind the bears and a mountain in the background.  So i used Fairy Hugs - Rugged Pines.. i stamped them with VersaFine Clair Ink - Nocturne and did some second generation stamping as well. Then i stamped the mountain peak from Fairy Hugs - 2nd Anniversary Set with VersaFine Clair Ink - Morning Mist and i colored them in with Prismacolor pencils.  Last, i used some torn paper and defined some ground/hills using Distress Oxide Ink - Chipped Sapphire and Milled Lavender.  I also purchased two additional sentiment sets and cut them apart to make this sentiment, but you could also mask off the sets and get the same result.

Fairy Hugs Store Supplies:

Fairy Hugs - Polar Bear Family

Fairy Hugs - Rugged Pines

Fairy Hugs - 2nd Anniversary Set - Special as You Are

Fairy Hugs Sentiment - It's Your Birthday

Fairy Hugs Sentiment - Love at Christmas

Fairy Hugs Craft Papers - FrostFlight

Like us on Facebook
Follow us on Instagram: Fairy Hugs Store

 Join our Fairy Hugs Facebook Group here

 Don't forget to include #FairyHugsStore on your projects and tag us at @FairyHugstore so we can be sure to see and comment on your projects!

Sign up to receive Fairy Hugs Newsletters at the Fairy Hugs store.

 

Thanks for stopping by!